De nouvelles versions de l'import export IFC pour revit 2015 et 2016 sont disponibles
IFC pour
Revit 2015 (v15.5):
IFC pour
Revit 2016 (v16.2):
A noter que :
- les versions 2013 et 2014 ne seront plus améliorées.
- Les versions IFC pour revit 2015 et IFC pour revit 2016 contiennent l'import export et l'interface améliorée. Inutile de faire deux installation distincte comme pour les versions précédentes.
- Ces mises à jour sont valables pour Revit et Revit LT.
Les nouveautés dans cette mise à jour (en anglais)
General:
- Both Link and
Export will use the IFC4 Addendum 1 schema instead of the IFC4 schema if the
IFC4_ADD1.EXP is loaded in the EDM sub-folder of your Revit executable folder.
New Export
Functionality:
- Allow setting
of IfcBuildingStorey element composition type via IfcElementCompositionType
shared parameter for levels.
- IFC4: handle
elliptical edges for IFC4 Design Transfer View export.
- Support export
of volumes as liters (a.k.a cubic decimeters)
- Support export
of volumetric flow rates as liters per second (a.k.a. cubic decimeters per
second).
New Export UI
Functionality:
- Better progress
messages in the status bar.
- Remove list of
"Current Options" from the starting UI dialog; only display the IFC
Schema and MVD as "IFC Version"
- Remove path
from "Projects to Export" list; the path is now a tooltip.
Export Bug Fixes:
- Correctly
toggle between SLIDING_TO_LEFT / SLIDING_TO_RIGHT for flipped doors.
- Use the element
type "Function" parameter when setting the "IsExternal"
common property for all element types, not just wall types.
New Import
Functionality:
- Add
"IfcElement HasPorts Name" and "IfcElement HasPorts
IfcGUID" parameters to show port information for elements. There
will be multiple shared parameters created if the element has multiple ports.
- Add support for
more thermal transmittance units.
- Entities that
are decomposed by IfcBuildingElementPart will now be visible if either the top
level category or the Parts category is enabled by default.
- If attempting
to create an IfcShellBasedSurfaceModel as a Solid results in any dropped faces,
import it as a Mesh instead.
- (2016 only) If
processing an IfcBooleanResult entity results in a failed Revit Boolean
operation, try again by slightly shifting (by 1mm) the second of the two
geometries in the operation.
- Improve import
of IfcSweptDiskSolid when the geometric description of the entity would create
a self-intersecting surface. In this case, create the minimum number of
solids possible to import as much as the geometry as possible.
- Read in
IfcSystems that aren't associated to the building via a IfcRelServicesBuildings
relation.
- Read in
IfcPropertyBoundedValues (including support for IFC4 version).
- Support import
of volumes as liters.
- Support import
of volumetric flow rates as liters per second.
Import Bug Fixes:
- Add a message
to the log file if we skip importing an IfcProduct that neither has geometry
nor is decomposed by other entities.
- Fix a potential
crash if a file contains a large number of elements in system joined by ports.
- Improve log
message when an entity can't be imported because it has no geometry.
- Improve log
message when an entity can't create all of the facets of its tessellated
geometric representation.
- Move some MEP entities from Generic Models category to the appropriate
categories by default.
